Infrared Remote Control (Included) - involight Paint BAR UV12 User Manual

3.7 Infrared remote control (included):

The included remote control allows you to control the "PaintBAR UV12" even without a DMX controller and offers
much more possibilities than the functions available via the on-board menu.
Make sure the remote control is pointing directly at the unit and there are no obstructions between the unit and the
remote control.
AUTO Mode:
The "AUTO" key puts the unit into the automatic mode.
1. Press <AUTO> on the remote control.
2. Press <+> or <-> to switch between the various Automatic programs.
SOUND Mode:
The <SOUND> key puts the unit in the music-controlled mode.
1. Press <SOUND> on the remote control.
2. Press <+> or <-> to switch between the various Sound programs.
STROBE Mode:
Press the <STROBE> key to activate the stroboscope in the automatic mode
Or music-controlled operation.
1. Press <STROBE> on the remote.
2. Press <+> or <-> to set the desired strobe speed.
3. Press <STROBE> again to turn off the strobe effect.
SPEED Mode:
Use the <SPEED> button to regulate the speed in automatic mode
Or music-controlled operation.
1. Press <SPEED> on the remote control.
2. Press <+> or <-> to set the desired running speed.
SENSITIVITY:
With the SENSIVITY you adjust the microphone sensitivity in the music - controlled
Operation.
1. Press <SENSIVITY> key to select the microphone sensitivity.
2. Press <+> or <-> to select the desired microphone sensitivity.
DMX Mode:
Press the <DMX /%> button to put the unit to DMX mode.
MANUAL Mode:
1. Press <MANUAL> on the remote control.
2. Use the R, G, B, A, UV or W buttons to select the desired colors set to.
(Depending on the device).
3. Press <+> or <-> to switch between the different color presets to choose.
FADE
Mode (depending on the device):
The "FADE" button puts the unit into the color change mode.
1. Press <FADE> on the remote control.
2. Press <FADE> again to exit the color change mode.
Number 1~9:
With the numbers 1-9, you can set the desired brightness in the automatic mode or in music-controlled mode. Press <1> to <9>
to select between the brightness levels.
BLACK OUT:
The <BLACK OUT> button turns off the LEDs.
1. Press <BLACK OUT> to turn off the LEDs.
2. Press <BLACK OUT> again to turn on the LEDs.
20