involight VENTUS L User Manual page 21

ON
ON
Infra
OFF
Addr 4CH
8CH
Slav
Slav
Disp
dISP
AUTOMATIC CONTROL:
"Menu"
Press the
"Enter"
program. Press
"Down"
buttons, you can now set the desired automatic program.
MUSIC CONTROL:
"Menu"
Press until
"SO-1"
select sound program
the desired sound program.
PROCEDURE OF THE PROGRAM:
"Menu"
Press the
"Enter"
again to select the speed
now set the desired speed of the program..
MICROPHONE SENSIVITY:
The sensitivity with which the headlamp reacts to the music signals (bass impulses).Press the
"Sens".
until the display shows
select the microphone sensitivity
can now set the desired microphone sensitivity. The height is the value, the more sensitive the microphone reacts
to the music signals (bass impulses) in the environment.
SILENT-MODE:
The Silent mode refers to the music-controlled operation and is also known as Intelligent Sound Control. If the
silent mode is activated
impulses), the light beams of the device switch off (BLACKOUT). If the silent mode is deactivated
current program of the device will continue slowly, even if no further music signals (bass impulses) are received.
"Menu"
Press until
"Enter"
Press again to select
can now activate the silent mode
IRC-CONTROLLING:
"Menu"
Press the
"Enter"
again to select
activate the IR remote control
DMX-MODE:
To select the DMX mode and set the start address, press
"Enter"
appears. Press
If the silent mode "ON" is switched on, the light
beams of the unit switch off (BLACKOUT) if no
further music signals (bass impulses) are
received.
IRC-Remote activated.
IRC-Remote de-activated.
4 channel DMX mode, then set the start address.
8 channel DMX mode, then set the start address.
Master / Slave operation. Define the device as
"Slave".
Display for normal use.
button repeatedly until the display shows
again to select
"Sound"
is displayed. Sound mode is activated. Press
"SO-7".
to
"SPED"
button until
"SP-1"
The microphone sensitivity menu is displayed. Press
"SE-1"
"ON"
and the microphone of the device does not receive any music signals (bass
"SILE"
is displayed. The menu for silent mode is displayed.
"ON"
"ON"
or deactivate
key until the display shows
"ON" "OFF".
or
"ON"
or deactivate
again to select
"Auto".
"AU-1"
to
"Up"
With the
appears on the display. The flow rate menu is displayed. Press
"SP-9"
to . With the "Up" and "Down" buttons you can
"SE-9".
to With the
"OFF".
or With the
"OFF".
"INFR".
The IR remote control menu is displayed. Press
"Up"
With the
"OFF".
"Menu"
"4CH" "8CH"
or
20
Now the unit plays the automatic
"AU-7"
. With the
"Enter"
"Down"
and buttons you can now set
"Menu"
"Enter"
"Up" "Down"
and
"Up" "Down"
and
"Down"
and buttons you can now
"ADDR"
button until the
"Setup"
mode. Press
"Up"
and
again to
button
again to
buttons, you
"OFF"
, the
buttons you
display
again to