Rack-Mounting The Switch - Acopia ARX 1000 Hardware Installation Manual

Chapter 5

Rack-Mounting the Switch

5 - 6
1. Holding the switch firmly, align the switch (front panel view) with
the rack rails.
2. Carefully slide the switch into place on the rails.
Figure 5.2 Aligning Switch with Rack Rails
Firmly grip the switch edges and slide the switch into place on the
rails.
3. Secure the switch to the rails by putting a screw through each ear on
the front of the ARX. This guards against the switch sliding out in
the event of an extreme earthquake.
screw hole