Console Connector And Pinouts - Acopia ARX 1000 Hardware Installation Manual

Console Connector and Pinouts

SCM/ACM
Console Port RJ-45 Rollover Cable
RJ-45
DTE Signal Pinout
TxD 3
Table 4.4 ACM Console Port Signaling/Cabling Using a Rollover Cable
ARX®1000 Hardware Installation Guide
The serial Console port requires a rollover cable (RJ-45 to RJ-45) that is
included with the ARX-installation kit. This cable is sufficient for
connecting to a Terminal Server. For a direct connection to the serial port on
a management station (such as a laptop), an RJ-45 to DB9 adapter is also
included in the kit.
Figure 4.1 RJ-45 Male Connector
Figure 4.2 RJ-45 to Serial DB9 Adapter
Table 4.4 lists the RJ-45 pinout assignments for the rollover cable and the
adapter. The left column shows the transmit (TxD), ground (GND), and
receive (RxD) signals. and the right column shows the signals reversed at
the console device. The intervening columns show the pins that carry each
of those signals.
USOC RJ-45
Color Pinout
yellow 6
Cable Connectors and Pinouts
RJ-45 to DB9 Adapter
RJ-45
Pinout T568 Color
6 yellow
Console
Device
DB9F
Pinout DTE Signal
2 RxD
4 - 7