Post Diagnostics - Acopia ARX 1000 Hardware Installation Manual

POST Diagnostics

prtlndA1k# show version
Copyright (c) 2002-2007 by Acopia Networks Inc. All rights reserved.
Running Release
test3.rel : Version 3.00.000.10557 (Oct 10 2007 18:11:53) [nbuilds]
Armed Release
test3.rel : Version 3.00.000.10557 (Oct 10 2007 18:11:53) [nbuilds]
Backup Release
test1.rel : Version 2.06.000.10247 (Aug 31 2007 18:27:12) [nbuilds]
System Configuration:
prtlndA1k uptime is 0 weeks, 0 days, 1 hours, 42 minutes.
Slot Admin ModuleType
---- ------- ------------
1 Enabled ACM
Resource State
-------- -------------------------------
Switch Up
prtlndA1k# show chassis
Identification:
Hostname
------------------------------------ --------------------------------------
prtlndA1k
Chassis:
Chassis Type Model Number
------------ ------------------------------------
ARX-1000 ARX1
Private Subnet:
VLAN Subnet
---- ----------------
1004 169.254.226.0
Chassis Environment:
Base MAC Address
-----------------
00:0a:49:08:61:00 Online
ARX®1000 Hardware Installation Guide
When the switch reboots and the system powers up, POST (power-on
self-test) diagnostics run to verify basic hardware integrity. You can view
any hardware failures at the system console through the
show chassis
commands. See the following sample output.
Figure 7.1 Show Version Sample
Version 300000.24
ModuleState
----------------
Online
Figure 7.2 Show Chassis Sample
UUID
876616f6-79ac-11d8-946f-958fcb4e6e35
Subnet Mask
----------------
255.255.255.0
Power
--------------
show version
FW Upgrade
----------
Disabled
Forwarding
----------
Disabled
HW Ver. Serial
------- -------------
B 18 03002145
POST Diagnostics
or
7 - 3