Connecting The Ethernet Management Port - Acopia ARX 1000 Hardware Installation Manual

Connecting the Ethernet Management Port

ARX®1000 Hardware Installation Guide
After you boot the switch, you can connect the Ethernet out-of-band
management port to a management station or network. You can use this
interface to access the Graphical User Interface (GUI) or the Command Line
Interface (CLI). To access the GUI, direct a web browser to the interface
over HTTPS (for example, "https://10.1.23.11/"). Use the crypto-officer
username and password, entered above, to log in. For the CLI, use SSH with
the interface and the crypto-officer username (for example, "ssh
admin@10.1.23.11").
The ARX GUI Quick Start: Network Setup manual contains instructions for
getting started with the GUI, and the ARX CLI Network-Management Guide
contains instructions and best practices for using the CLI.
Connecting the Ethernet Management Port
6 - 13