Cable Connectors And Pinouts - Acopia ARX 1000 Hardware Installation Manual

Chapter 4

Cable Connectors and Pinouts

Interface Connector
Console RJ-45
MGMT RJ-45
Gigabit Ethernet...
Optical ports small form-factor
pluggable (SFP)
Copper ports RJ-45
Table 4.3 Cable Connectors
4 - 6
Table 4.3 describes the cable connectors used on the ARX®1000 switch.
Purpose
Serial port for CLI access
Ethernet port for CLI or GUI access
Two optical ports for 1-Gbps Ethernet connections over multi mode
fiber
Four 100/1000BASE-T Ethernet ports
Important
Fiber-optic ports are shipped with cable connectors installed. These
ports must be protected by a rubber grommet filler or a cable connector
at all times to prevent dust from collecting in the transceiver.