Siemens Simatic S7-1500 Manual page 78

Wiring
4.3 Terminal and block diagrams
Wiring: 2-wire connection of resistance-type sensors or thermal resistors (RTD)
The following figure shows the terminal assignment for 2-wire connection of resistance-type
sensors or thermal resistors at the channel available for this (channel 4).
Note
2-wire connection
Note that line resistances are not compensated with a 2-wire connection.
①
②
③
④
⑤
⑥
Figure 4-8
78
Analog-to-digital converter (ADC)
LED interface
Infeed element (for shielding only)
Digital-to-analog converter (DAC)
Equipotential bonding cable (optional)
2-wire connection
Block diagram and terminal assignment for 2-wire connection
CPU 1512C-1 PN (6ES7512-1CK00-0AB0)
Manual, 09/2016, A5E35306440-AB