Siemens Simatic S7-1500 Manual page 114

Parameters/address space
5.7 Parameters of the digital on-board I/O
Configurable parameters and default settings for outputs
Table 5- 11 Configurable parameters for outputs
Parameters
1)
Diagnostics
Missing
•
supply voltage L+
Reaction to CPU STOP
When the digital output is controlled by a
technology channel (HSC, PTO or PWM),
this parameter is not effective. In this case
the technology channel specifies the reac-
tion of the digital output to CPU STOP.
All parameters can be set channel-selective
1)
114
Value range
Yes/No
Turn off
•
Keep last value
•
Output substitute value 1
•
Default Reconfiguration in RUN
No Yes
Turn off Yes
CPU 1512C-1 PN (6ES7512-1CK00-0AB0)
Manual, 09/2016, A5E35306440-AB