Ssd - HP Pro x2 612 G2 Maintenance And Service Manual

SSD

Description
SSD
128 GB M2 SATA-3
256 GB Turbo Drive G2 TLC
256 GB SATA-3 SED OPAL2 TLC
360 GB PCIe TLC
512 GB PCIe TLC
IMPORTANT:
Before removing the SSD, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Keyboard (select products only) (see
b. Micro SIM card tray (see
c. MicroSD card tray (see
d. Rear cover (see
e. Disconnect the battery (see
Remove the SSD:
1. Remove 1 Phillips M2.0x2.0 screw (1).
38 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Make special note of each screw size and location during removal and replacement.
Micro SIM card tray on page
MicroSD memory card tray on page
Rear cover on page
Disconnecting the battery on page
Keyboard (select products only) on page
32)
33)
34)
Spare part number
918353-001
918354-001
918356-001
918357-001
918358-001
31)
35)