Ricoh D014 Service Manual page 1571

Dedicated Transmission Parameters
4.5.2 PARAMETERS
Fax Parameters
The initial settings of the following fax parameters are all FF(H). This means that all the
parameters are disabled.
ITU-T T1 time (for PSTN G3 mode)
If the connection time to a particular terminal is longer than the NCU parameter setting,
adjust this byte. The T1 time is the value stored in this byte (in hex code), multiplied by 1
second.
Range: 0 to 120 s (00h to 78h)
FFh - The local NCU parameter factory setting is used.
Do not program a value between 79h and FEh.
D356
CÓPIA NÃO CONTROLADA
Switch 00
Function and Comments
170
CÓPIA NÃO CONTROLADA
SM