Table of Contents
Advertisement
INSTALLATION
Installing the Oven
Electrical installation of this appliance must be performed only by a licensed electrician.
The oven must be installed according to the instructions supplied.
Remove the protective vinyl from the door after installation.
Safety instructions for the installer
Installation must guarantee protection against exposure to electrically live parts.
Installation of Built-in Ovens
In order to ensure that the built-in appliance functions properly, the cabinet containing it must be
appropriate .The figure below gives the dimensions of the cut-out for installation under the counter
or in a wall cabinet unit.
N.B:
Installation in compliance with the consumption
declaration
In order to ensure adequate ventilation, the back panel of the cabinet unit must be removed.
Installing the oven so that it rests on two strips of wood is preferable .If the oven rests on a
continuous, flat surface, there must be an aperture of at least 45×560mm.
The panels of the adjacent cabinets must be made of heat-
resistant material .In particular; cabinets with a veneer exterior
must be assembled with glues which can withstand temperatures of up to 100°.
In compliance with current safety standards, contact with the electrical parts of the oven must not
be possible once it has been installed.
All parts, which ensure the safe operation of the appliance, must be removable only with the aid of a
tool.
To fasten the oven to the cabinet, open the door of the oven and attach it by inserting the 4 wooden
screws into the 4 holes located on the perimeter of the frame.
22
Advertisement
Table of Contents
