Table of Contents
Advertisement
Temperature units
Click temperature units Settings into the Settings interface; choose the corresponding units in the
options after playing "√", set up after the completion of the touch "OK" button to return to the
interface of set.
Factory default setting
Click the default factory Settings options into the set, if you select "YES" said change all the Settings
will be restored, set up after the completion of the touch "OK" button to return to the interface of
setup.
Theme
Click on the theme Settings set into the interface, click the corresponding theme in the options after
playing "√", set up after the completion of the touch "OK" button to return to the interface of setup.
Quick manual operation
Switch the oven on; select a function and a temperature and switch the oven off after the end of the
programme.
Selecting a function
Switch the oven on.
Select the grill setting.
After selecting an oven function, options which can be entered or changed for the cooking
programme will appear in the display, e.g.:
Temperature
Duration
Start time
Finish time
Heating-up phase
Rolling shelf (only with Grill, Fan grill )
If you don't modify the parameters, directly click the "OK" button. The program will begin to run
after 5 seconds.
If you want to modify the function parameters, Touch
parameters, and then click on the corresponding changes into the interface.
The oven will display "heating". Once the oven has reached the desired temperature the display will
show "program processing". The oven is now ready to place food in.
Changing the temperature
Hold and adjust the slider to coarse adjustment of temperature, per slide about 10 ℃,
through the fine adjustment of the temperature + 5/-5 buttons.
Transferred to the temperature you need, click the "OK" button, save the set value, and
returns the function sub menu.
Changing the duration
Through the keyboard input the required program running time, with the digital input, run in
the middle of the left side of the time change, input hours first, and then input minutes.
Timing starts immediately. Once preheat is complete duration time will need to be reset to
time required
Click "OK" button to save the set value, and returns the function sub menu; if you don't run
time Settings, the default program will run 2 hours.
button until the need to modify the
8
Advertisement
Table of Contents
