Table of Contents
Advertisement
Set the start time
Through the keyboard input the required program running time, with the digital input, run in
the middle of the left side of the time change, input hours first, and then input minutes.
Click "OK" button to save the set value, and returns the function sub menu.
If not set the start time, the default start time for the current clock time, and the Program
start time is not displayed in the sub menu interface function.
Set the finish time
Through the keyboard input the required program running time, with the digital input, run in
the middle of the left side of the time change, input hours first, and then input minutes.
Click "OK" button to save the set value, and returns the function sub menu.
If not set the finish time, the default end time for the current clock time plus program
running time, and the Program finish time is not displayed in the sub menu interface
function.
Set the heating-up phase
When a function is selected press the down button to display the second page.
Touch heating-up phase options into the interface, the corresponding heating mode is
selected, the corresponding options to play behind the "√", after complete touch "OK"
button to return to functional sub menu. The default is normal.
Fast heat uses extra elements to protect oven.
Change the parameters in the operation of the program
In the process of a program running, you can click "Change" button to return to the interface of
function parameters, change to parameter reset has run the function of the program, the program
stops temporarily, parameter changes after press "OK" key program continues to run, can modify
the parameters including: Temperature, Duration/Probe, Start time, finish time, Heating-up phase.
Cancel the running program
When the oven is not begun to execute a program, touch
menu.
When the program operation of the oven, touch
Click "YES" to return to a layer on the menu, and terminate the program running, click "NO",
to continue their selected program.
Other features
Child safety function
When the oven is in standby mode, touch
is locked.
At this point, only
When the oven controls have been set, touch
current operating interface or application interface.
Hold the
can be normal operation.
key is effective, other keys are invalid.
button for 3 seconds, the
key, it returns a layer on the
key, to prompt the diagram below:
and maintain for 3 seconds, the control panel
and maintain for 3 seconds, lock on
on the right side of the display time disappear,
9
Advertisement
Table of Contents
