Scpi Commands - Sweeps - Keithley 6220 DC User Manual

Model 6220/6221 User's Manual
SCPI commands — sweeps
Commands for linear and logarithmic staircase sweeps are listed in
while commands for custom (list) sweeps are listed in
Table 4-3
Staircase sweep commands (linear and logarithmic)
SOURce[1]:CURRent:STARt <n>
SOURce[1]:CURRent:STOP <n>
SOURce[1]:CURRent:STEP <n>
SOURce[1]:CURRent:CENTer <n>
SOURce[1]:CURRent:SPAN <n>
SOURce[1]:DELay <n>
SOURce[1]:SWEep:ARM
SOURce[1]:SWEep:ABORt
SOURce[1]:SWEep:SPACing <name> Selects sweep type.
SOURce[1]:SWEep:POINts <n>
SOURce[1]:SWEep:RANGing <name> Selects sweep source ranging.
SOURce[1]:SWEep:CABort <b>
SOURce[1]:SWEep:COUNt <NRf>
Command
Return to
Description
Sets start current.
<n> = -0.105 to 0.105 (A)
Sets stop current.
<n> = -0.105 to 0.105 (A)
Sets step current.
<n> = 1e-13 to 0.105 (A)
Sets center current.
<n> = -0.105 to 0.105 (A)
Sets span current.
<n> = 2e-13 to 0.210 (A)
Sets source delay.
<n> = 0.001 to 999999.999 (s)
Prepare for running the sweep.
Abort sweep immediately.
<name>=LINear, LOGarithmic, or LIST
Sets sweep points.
<n> = 1 to 65535
<name>=AUTO, BEST, or FIXed
Sets compliance sweep abort state.
<b> = ON or OFF
Sets sweep count.
<NRf> = 1 to 9999 or INFinite
Section 4 topics
Sweeps 4-11
Table 4-3,
Table 4-4.
Default
0
0.1
1e-2
0
0.1
1
LINear
11
BEST
OFF
1