Table B-11 Units Command Summary - Keithley 6220 DC User Manual

B-10 SCPI Tables (Abridged)
Table B-10
Trigger command summary
Command*
INIT Trigger initiation:
[:IMM]
ABOR Reset trigger system.
ARM Arm layer commands:
:SOUR <name>
:SIGN
:TIM <n>
:DIR <name>
:ILIN <NRf>
:OLIN <NRf>
:OUTP <name>
TRIG Trigger layer commands:
:SOUR <name>
:SIGN
:DIR <name>
:ILIN <NRf>
:OLIN <NRf>
:OUTP <name>
* Arm layer commands control entire sweep. Trigger Layer commands control individual sweep steps.
Table B-11
Units command summary
Command
UNIT
[:VOLT]
[:DC] <name>
:POW
[:TYPE] <name>
* The <name> parameter for Siemens can be sent as S, SIEM, or SIEMENS.
Initiate one trigger cycle.
Select event detector: IMM, TIM, BUS, TLIN, BST, PST, NST, or MAN.
Bypass ARM control source.
Set timer interval (seconds): 0 to 99999.99. 1msec resolution.
Control ARM source bypass: SOUR or ACC.
Set ARM input signal line: 1 to 6.
Set ARM output signal line: 1 to 6.
Enable/disable ARM output trigger: TENT, TEX, or NONE.
Select event detector: IMM or TLIN.
Bypass TRIG control source.
Control TRIG source bypass: SOUR or ACC.
Set TRIG input signal line: 1 to 6.
Set TRIG output signal line: 1 to 6.
Enable/disable TRIG output trigger: SOUR, DEL, or NONE.
Commands to set reading units for Delta, Pulse Delta, and Differen-
tial Conductance:
Volts readings are sent from 2182/2182A to 622x.
Specify reading units*: V, OHMS, W, or SIEM.
Power reading type for Pulse Delta (6221):
Set power units reading type: PEAK or AVER.
Return to
Model 6220/6221 User's Manual
Description
Description
Appendix B tables
Default
OFF
0.1
ACC
1
2
NONE
IMM
ACC
1
2
NONE
Default
V
AVER