3-8
DC Current Source Operation
Setting source and compliance
Source and compliance editing from the front panel cannot be performed from the
front panel if the Model 622x is in remote. To return to the local state, press the
LOCAL key.
For remote programming, commands to select source range, and set source
and compliance values are shown in
provided in the procedure for
Source and compliance editing
Figure 3-3
Figure 3-4
The procedure to set source and compliance values for the Model 6221 follow
Figure
on page 3-9.
Figure 3-3
Source and compliance editing – Model 6220
Step 1
Select DC
output mode
Step 4 Set source or compliance value
Value Adjust Keys
Cursor Keys
ENTER / EXIT Keys
EXIT
ENTER
explains how to set source and compliance values for the Model 6220.
shows the source and compliance editing controls for the Model 6221.
3-4.
"Source/compliance editing
Step 2 Select source range
Numeric Entry Keys
0 1 2 3 4 5 6 7 8 9 +/ 0000
0000
+/
Return to
Table
3-2. Programming examples are also
"Sourcing
current" on page 3-12.
notes" for both procedures are provided
Step 3 Enter editing mode
Value Adjust Method:
Numeric Entry Method:
Section 3 topics
Model 6220/6221 User's Manual
Value Adjust Key
Cursor Key
Cursor Keys
Value Adjust Keys
Cursor Keys
0-9