Table of Contents
Advertisement
Model 6220/6221 User's Manual
Bottom Row
SAVE
SETUP
TRIAX
AVG
MATH
MENU
EXIT
ENTER
3 Range keys:
AUTO
4 Output control and LED status indicator:
OUTPUT ON/OFF
LED indicator
5 Rotary knob and CURSOR keys (Model 6221):
When in source edit, use CURSOR keys for cursor control and rotate the knob to change
a source or compliance value. The rotary knob can also be used to enable or disable the
source EDIT mode.
When in a menu, use the CURSOR keys or rotary knob for menu item cursor control.
When displaying a menu value, use the CURSOR keys for cursor control and rotate the
knob to change the value. Pressing the knob opens a menu item or selects a menu option
or value.
6 Display annunciators (not shown):
EDIT
ERR
REM
TALK
LSTN
SRQ
FILT
MATH
AUTO
ARM
TRIG
* (asterisk)
SMPL
Saves up to five instrument setups for future recall, and selects power-on
setup.
Restores a default setup (preset or *RST) or a user saved setup.
Configures triax connector: Inner shield and Output Low. Can also press
CONFIG > TRIAX to configure triax connector.
Enables/disables averaging filter. Press CONFIG > AVG to configure
averaging filter.
Enables/disable math. Press CONFIG > MATH to configure math.
Accesses the main menu for calibration, self-tests, serial number, and
beeper control.
Cancels selection, backs out of menu structure.
Accepts selection, moves to next choice or exits menu.
and
Dual function – Selects the next higher or lower source range. When in a
menu, these keys increment or decrement values.
Enables or disables source autorange.
Turns source output on or off. For the 6221, press
CONFIG > OUTPUT to set the output response for the Model 6221.
Turns on when output is on. Blinks if source goes into compliance.
Unit is in the source editing mode.
Questionable reading or invalid cal step.
Unit in remote mode.
Unit addressed to talk.
Unit addressed to listen.
Service request.
Analog filter or Averaging filter is enabled.
Math is enabled.
Auto source range selected.
Sweep or delta function armed and ready to run.
External triggering selected.
Readings being stored in buffer.
Blinks for every other reading acquired from the Model 2182/2182A.
Return to
Section 1 topics
Getting Started
1-7
Advertisement
Table of Contents
