Scpi Commands - Wave Functions; Table 7-4 Waveform Function Commands - Keithley 6220 DC User Manual

Model 6220/6221 User's Manual
SCPI commands — wave functions
Commands for wave functions are listed in
Table 7-4
Waveform function commands
Command
SOURce[1]:WAVE:FUNCtion <name>
SOURce[1]:WAVE:DCYCle <NRf>
SOURce[1]:WAVE:AMPLitude <NRf>
SOURce[1]:WAVE:FREQuency <NRf>
SOURce[1]:WAVE:OFFset <NRf>
SOURce[1]:WAVE:RANGing <name>
SOURce[1]:WAVE:PMARk <NRf>
SOURce[1]:WAVE:PMARk:STATe <b>
SOURce[1]:WAVE:PMARk:OLINe <NRf>
SOURce[1]:WAVE:ARBitrary:DATA <NRf>
[,<NRf>, ... <NRf>]
SOURce[1]:WAVE:ARBitrary:APPend <NRf>
[,<NRf>, ... <NRf>]
SOURce[1]:WAVE:ARBitrary:COPY <NRf>
SOURce[1]:WAVE:ARBitrary:POINts?
Table
Selects wave function.
<name> = SINusoid, SQUare,
RAMP, or ARBitraryX (0-4)
Sets duty cycle.
<NRf> = 0 to 100 (%)
Sets amplitude.
<NRf> = 2e-12 to 0.105 (A peak)
Sets frequency.
<NRf> = 0 to 1e5 (Hz)
Sets offset.
<NRf> = -0.105 to 0.105 (A)
Selects ranging mode.
<name> = BEST or FIXed
Sets marker phase.
<NRf> = 0 to 360 (deg.)
Enables/disables phase marker.
<b> = ON or OFF
Sets phase marker trigger line.
<NRf> = 1 to 6
Defines arbitrary data points.
<NRf> = -1 to +1 (100 points max.)
Appends arbitrary data points.
<NRf> = -1 to +1 (100 points max.
per instance of command)
Copies arbitrary points to NVRAM.
<NRf> = 1 to 4
Queries # of arbitrary data points.
Return to Section 7 topics
Wave Functions (6221 Only) 7-15
7-4.
Description Default
SIN
50
1e-3
1e3
0
BEST
180
OFF
3