Table of Contents
Advertisement
7-16
Wave Functions (6221 Only)
Table 7-4 (cont.)
Waveform function commands
Command
SOURce[1]:WAVE:ARM
SOURce[1]:WAVE:INITiate
SOURce[1]:WAVE:ABORt
SOURce[1]:WAVE:DURation:TIME <NRf>
SOURce[1]:WAVE:DURation:CYCLes <NRf>
SOURce[1]:WAVE:EXTRig[:ENABle] <b>
SOURce[1]:WAVE:EXTRig:ILINe <NRf>
SOURce[1]:WAVE:EXTRig:IGNore <b>
SOURce[1]:WAVE:EXTRig:IVALue <NRf>
* Waveform triggering available with firmware revision level A03 and later. See Section 7 of the Model 6220/6221
Reference Manual for details.
Arms 6221 for waveform output.
Starts waveform output.
Aborts waveform output.
Sets waveform time duration.
<NRf> = 100e-9 to 999999.999 (s)
or INFinity.
Sets waveform duration in cycles.
<NRf> = 0.001 to 99999999900
or INFinity.
Enables/disables mode to externally
trigger the waveform generator. *
<b> = ON or OFF
Specify trigger link input trigger line.
<NRf> = 0 (none) or 1 to 6
Sets whether or not to restart
waveform upon retriggering.
<b> = ON or OFF
Sets inactive value to output before/
after waveform.
<NRf> = -1 to +1
Return to
Section 7 topics
Model 6220/6221 User's Manual
Description
Default
INFinity
INFinity
OFF
0
OFF
0.00
Advertisement
Table of Contents
