Scpi Tables (Abridged) - Keithley 6220 DC User Manual

Model 6220/6221 User's Manual
Table B-3
Format command summary
Command
FORM
[:DATA] <type>
:ELEM <item list>
:BORD <name>
:SREG <name>
Note: *RST default is NORM. SYST:PRES default is SWAP.
Table B-4
Output command summary
Command
OUTPut Source output control:
[:STAT]? Turn output on or off (standby).
:LTE <b> Connect output low to earth ground (ON) or float output low (OFF).
:ISH <name> Connect triax inner shield to OLOW (output low) or cable GUAR.
:RESP <name> Set the output response for 6221: FAST or SLOW.
:INT Interlock:
:TRIP?
Table B-5
Sense command summary
Command
SENS Commands for readings from 2182/2182A:
:DATA?
:FRES?
:AVER
:TCON <name>
:WIND <NRf>
:COUN <NRf>
[:STAT] <b>
Reading format commands:
Specify data format: ASC, SRE, or DRE
Specify data elements: READ, TST, UNIT, RNUM, SOUR,
COMP, AVOL (or ALL or DEF)
Specify byte order: NORM or SWAP.
Select format for reading status registers: ASC, HEX, OCT or BIN.
Returns a "0" if interlock is tripped (open) or a "1" if interlock is closed
(output enabled).
Return the latest pre-math delta reading.
Same as :DATA? except the reading can only be returned once.
Averaging filter:
Select filter control: MOV or REP
Set filter window as % of range: 0 to 10
Specify filter count (size): 2 to 300
Enable or disable averaging filter.
Return to
Description
Description
Description
Appendix B tables

SCPI Tables (Abridged)

Default
ASC
READ,
TST
(Note)
ASC
Default
OFF
OFF
OLOW
FAST
Default
MOV
0.00
OFF
B-3
10