Replacement Components - WaterLogic infiniti Operating, Installation And Service Manual

Component
Hot Tank (Factory Set Point of
185°F - 85°C)
1.6 Liter Capacity
Replacement parts can be obtained from Waterlogic Dealer.
See Parts Layout Drawing and Parts List for additional repair parts.
Hot Tank Service
Hot Tanks (with controls) must be replaced at least every 3-5 years depending on usage.
Descaling hot tank may be required on a regular basis depending upon filtration and local water
conditions. See Service Section.
NOTE:
At the end of this product's life, ensure that it is disposed of in an environmentally friendly manner
which is fully compliant with all Federal/State/Local Requirements and Guidelines.
infiniti Operating, Installation, and Service Manual

REPLACEMENT COMPONENTS

Part No. Frequency of Replacement
Replace every 3-5 years depending on
HT-3024 usage.
WLCP PN 10-4029
Page 21 - Revision: 9-15-2016