Replacement Components - WaterLogic WL500 Operating, Installation And Service Manual

Component
UV Light, TUV-8W
UV Quartz Sleeve
10" Twist Carbon Block Filter,
1-Micron, Reverse Threaded
10" Twist GAC filter, with
Polyphosphate Additive
Reduce Scaling, Reverse
Threaded
Replacement parts can be obtained from Waterlogic or an Authorized
Waterlogic Dealer.
See Parts Layouts, Drawings, and Lists for additional repair parts.
Hot Tank HT-3021 Service
Hot Tank (with controls) must be replaced at least every 5 years.
Descaling hot tank may be required on a regular basis depending
upon filtration and local water conditions. See Service Section.
Hot Tank Assembly Part Number is HT-3021 (WLUSA # 10-7082)
Sparkling Chamber Level Sensor Probe Assembly CT-2023
WL500 Sparkling chamber has a level sensor probe that needs to be
maintained and descaled at every filter change. Replace if needed.
Level Sensor Probe Part Number is CT-2023-A (WLUSA# 10-7250)
NOTE:
At the end of this product's life, ensure that it is disposed of
in an environmentally friendly manner which is fully compliant
with all Federal/State/Local Requirements and Guidelines.
CO
Waterlogic CO
proof adjuster, preset to 35-45 psi, single output
pressure gauge, inline shut-off valve, ¼ quick
connect fitting, safety relief, and CO
thread adapter.
WL500 Operating, Installation, and Service Manual

REPLACEMENT COMPONENTS

Part No.
CT-2001 Every 12 months, or as required
WLUSA# 10-7020
CT-2002 Clean every 12 months, replace as needed
WLUSA# 10-1400
PU-4029 Every 6-months, or 2,000 gallons, whichever
comes first. Local water conditions will
determine proper filter type and maintenance
schedule. WLUSA# 10-2801
Every 6-months, or as required. Local water
PU-4076
conditions will determine proper filter type
to
and maintenance schedule. WLUSA# 10-7002
Pressure Regulator Part Number AK-0003-L00
2
Pressure Regulator with tamper
2
Frequency of Replacement
CGA-320
2
Page 29 - Revision: 5-29-2015