9. Adding Paper and Toner
• If you select Thick Paper 2 to 4, [Coated Paper: High Gloss], [Coated: Glossy], [Coated: Matte],
or [Label Paper] in [Tray Paper Settings], air is blown out automatically to fan the paper loaded in
the wide LCT. Fan this paper before loading it. For details, see page 139 "Fanning the paper".
• You can load envelopes in the wide LCT. When loading envelopes, place them in the correct
orientation. For details, see page 177 "Envelopes".
Loading Paper into the Interposer
• Do not place anything on top of or leave documents on the sensor. This may lead to the paper size
not being correctly scanned or paper jams.
• When using the Z-fold function, the paper in the interposer must be of the same size as the prints
after they have been folded. If the paper in the interposer is larger than the Z-folded sheets, a
misfeed might occur.
• Do not use paper that has already been printed onto by this machine.
1.
Load paper orderly.
Do not stack paper over the limit mark.
158
DRC172