Ricoh Aficio MP C6503SP User Manual page 202

10. Troubleshooting
Message
"Cannot print from the sub-
machine. Check the status of
the sub-machine."
"Cannot print from the sub-
machine. Sub-machine will
be disconnected."
"Fold is available only when
Sort mode is selected in
Connect Copy."
"No stamp data in the sub-
machine."
"Sub-machine does not have
the same paper setting(s)."
"Sub-machine is in Interrupt
mode."
"Sub-machine paper settings
must be the same to use this
tray."
"The Cover Sheet setting(s)
of the sub-machine is
different from the main
machine."
"The Designation Sheet n
setting(s) of sub-machine is
different from main
machine."
("n" in the message
represents a changeable
number.)
"The Slip Sheet setting(s) of
the sub-machine is different
from the main machine."
200
Causes
The sub-machine's User
Tools menu is open.
The sub-machine has
stopped due to power
failure or communication
error.
Sort has not been selected
with fold.
Stamp data on the sub-
machine has been deleted.
Paper type or tray settings
on the two machines do not
match.
The sub-machine is in
Interrupt mode.
Paper tray settings on the
two machines do not match.
Cover Sheet settings on the
two machines do not match.
Designation Sheet settings
on the two machines do not
match.
Slip Sheet settings on the
two machines do not match.
Solutions
Press [User Tools] to close the User
Tools menu.
Continue copying using the main
machine.
Select the Sort function.
Reprogram the stamp on the sub-
machine.
Make the same settings on both
machines.
Press [Interrupt] on the sub-machine to
cancel Interrupt mode.
Make the same settings on both
machines.
Make the same settings on both
machines.
Make the same settings on both
machines.
Make the same settings on both
machines.