Ricoh Aficio MP C6503SP User Manual page 158

9. Adding Paper and Toner
1 1
1. Supporting plate
7. Hold the indents at the bottom of the side fences with your fingers, and adjust the side
fences to the paper size.
Set the paper flush against the protrusions in the bottom of the inner side fence. Make sure that
there is no space between the paper and the side fences.
Check that the positions of the scale numbers on the top of both of the side fences are almost the
same. When loading regular size paper, align the screw holes on the side fences to the paper size
mark.
8. Hold the inner side fence, and then tighten the screws to the inner side fence.
Fasten the front side fence in the same way.
156
DRC185
DRC186
DRC190