9. Adding Paper and Toner
1.
While pressing the release lever, align the side fences with the paper size to be loaded.
2.
Load paper orderly.
Do not stack paper over the limit mark.
Align the side fences gently against the paper you loaded, if necessary.
1
1
1. Paper extenders
• Load paper with its printed side up (the front side).
• Load paper in the twin interposer in the same orientation as paper in the paper tray.
• The staple position or punch hole position will be on the left side of the paper, when you are facing
the machine.
• When loading paper larger than A4 (8
• To load the paper in the twin interposer, align the orientation of originals in the ADF as shown
below.
160
CVA032
CVA033
1
/
2
Twin interposer
× 11) , pull out the paper extender.
ADF