9. Adding Paper and Toner
4.
Load paper by repeating Steps 2 and 3.
5.
Close the top cover of the LCT.
Loading Paper into the Wide Large Capacity Tray
Various sizes of paper can be loaded in the wide LCT by adjusting the positions of side fences and end
fence. You can change paper sizes as shown below.
• Check that the paper edges are aligned with the left side.
1.
Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2.
Remove paper if loaded.
154
CVA063
DRC170