Z-fold support tray 3
Attach the Z-fold support tray 3 by inserting the two protrusions on its underside into the
holes on the finisher shift tray.
If the finisher is installed with the cooling fan unit, proceed to Step 4.
4. Press the [Suspend / Resume] key.
Multi-folding unit
1. Open the front cover of the multi-folding unit and take out the Z-fold support tray for multi-
folding unit (located at the bottom of the multi-folding unit).
2. Attach the Z-fold support tray for multi-folding unit in the slope of the folding unit tray so that it
is flush against the end fence.
Guide to Functions of the Machine's Options
CNM015
CVF025
CVF026
39