Dell iDRAC 8 User Manual page 273

6. If there is a configuration that needs to be staged and the Shut Down Type is specified as No Reboot is specified in the
control file, then you must reboot the server for the settings to be configured. Else, server is rebooted and the configuration is
applied. Only when the server was already powered down, then the staged configuration is applied even if the No Reboot
option is specified.
7. After the import job is complete, the LCD/LED indicates that the job is complete. If a reboot is required, LCD displays the job
status as "Paused waiting on reboot".
8. If the USB device is left inserted on the server, the result of the import operation is recorded in the results.xml file in the USB
device.
LCD messages
If the LCD panel is available, it displays the following messages in a sequence:
1. Importing – When the server configuration profile is being copied from the USB device.
2. Applying — When the job is in-progress.
3. Completed — When the job has completed successfully.
4. Completed with errors — When the job has completed with errors.
5. Failed — When the job has failed.
For more details, see the results file on the USB device.
LED blinking behavior
If the USB LED is present, it indicates the following:
• Solid green – When the server configuration profile is being copied from the USB device.
• Blinking green – When the job is in-progress.
• Solid green – When the job has completed successfully.
Logs and results file
The following information is logged for the import operation:
• Automatic import from USB is logged in the Lifecycle Controller log file.
• If the USB device is left inserted, the job results are recorded in the Results file located in the USB key.
A Result file named Results.xml is updated or created in the subdirectory with the following information:
• Service tag – Data is recorded after the import operation has either returned a job ID or returned an error.
• Job ID – Data is recorded after the import operation has returned a job ID.
• Start Date and Time of Job - Data is recorded after the import operation has returned a job ID.
• Status – Data is recorded when the import operation returns an error or when the job results are available.
273