Idrac Port Information - Dell iDRAC 8 User Manual

Interface or Protocol

iDRAC port information

The following ports are required to remotely access iDRAC through firewalls. These are the default ports iDRAC listens to for
connections. Optionally, you can modify most of the ports. To do this, see
Table 4. Ports iDRAC listens for connections
Port Number
22*
23*
80*
443*
623
161*
5900*
5901
* Configurable port
The following table lists the ports that iDRAC uses as a client.
Table 5. Ports iDRAC uses as client
Port Number
25*
53
68
69
162*
28
Description
For more information, see the following:
• Lifecycle Controller-Remote Services User's Guide available at dell.com/idracmanuals.
• Lifecycle Controller Integration Best Practices Guide available at dell.com/support/manuals.
• Lifecycle Controller page on Dell TechCenter — delltechcenter.com/page/Lifecycle+Controller
• Lifecycle Controller WS-Management Script Center — delltechcenter.com/page/Scripting+the
+Dell+Lifecycle+Controller
• MOFs and Profiles — delltechcenter.com/page/DCIM.Library
• DTMF website — dmtf.org/standards/profiles/
Function
SSH
Telnet
HTTP
HTTPS
RMCP/RMCP+
SNMP
Virtual Console keyboard and mouse redirection, Virtual Media, Virtual Folders, and Remote File
Share
VNC
When VNC feature is enabled, the port 5901 opens.
Function
SMTP
DNS
DHCP-assigned IP address
TFTP
SNMP trap
Configuring services.