Idrac Smclp Syntax - Dell iDRAC 8 User Manual

where, y is an alpha-numeric character such as M (for blade servers), R (for rack servers), and T (for tower servers) and x is a
number. This indicates the generation of Dell PowerEdge servers.
NOTE: Scripts using -$ can use these for yx1x systems, but starting with yx2x systems one script with admin-> can be
used for blade, rack, and tower servers.

iDRAC SMCLP syntax

The iDRAC SMCLP uses the concept of verbs and targets to provide systems management capabilities through the CLI. The verb
indicates the operation to perform, and the target determines the entity (or object) that runs the operation.
The SMCLP command line syntax:
<verb> [<options>] [<target>] [<properties>]
The following table provides the verbs and its definitions.
Table 39. SMCLP verbs
Verb
cd
set
help
reset
show
start
stop
exit
version
load
The following table provides a list of targets.
Table 40. SMCLP targets
Target
admin1
admin1/profiles1
admin1/hdwr1
admin1/system1
admin1/system1/capabilities1
Definition
Navigates through the MAP using the shell
Sets a property to a specific value
Displays help for a specific target
Resets the target
Displays the target properties, verbs, and subtargets
Turns on a target
Shuts down a target
Exits from the SMCLP shell session
Displays the version attributes of a target
Moves a binary image to a specified target address from a URL
Definitions
admin domain
Registered profiles in iDRAC
Hardware
Managed system target
Managed system SMASH collection capabilities
253