Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 54

LAG
LAG Hashing Fields used for 7210 SAS-M (Network
mode)
Table 7:
M devices
Service and Traffic direction
(For example: SAP to SDP)
PBB Epipe service:
Originating PBB BEB traffic
(that is, PBB Epipe I-SAP to B-
SAP)
PBB Epipe service:
Terminating PBB BEB traffic
(PBB Epipe SAP to B-SAP)
VPRN service:
SAP to SAP
SDP to SAP
VPRN service:
SAP to SDP
IES service (IPv4):
IES SAP to IES SAP
IES service (IPv4):
IES SAP to IPv4 network port
interface
Network port IPv4 interface:
IPv4 network interface to IPv4
network interface
Page 48
Guide
LAG Hashing mechanism for services configured in Network Mode on 7210 SAS-
7210 SAS M, T, X, R6, Mxp Interface Configuration
Packet fields used for Hashing for different
traffic types
IP traffic: Source and Destination IP, Source
and Destination L4 ports, Ingress Port-Id
L2/non-IP traffic: CSA, CDA, EtherType,
VLAN, Ingress Port-Id
IP traffic: CSA, CDA
L2/non-IP traffic: CSA, CDA, EtherType
IP traffic: Source and Destination IP, Source
and Destination L4 ports
IP traffic: Source and Destination IP, Source
and Destination L4 ports, Ingress port-Id
IPv4 unicast traffic: Source and Destination
IP, Source and Destination L4 ports
IPv4 unicast traffic: Source and Destination
IP, Source and Destination L4 ports, Ingress
Port-Id.
IPv4 unicast traffic: Source and Destination
IP, Source and Destination L4 ports, Ingress
Port-Id.