Hardware Commands
===============================================================================
Chassis Information
===============================================================================
Power Supply Information
Number of power supplies
Power supply number
Configured power supply type
Status
AC power
Over temp
Input power
Output power
Power supply number
Configured power supply type
Status
AC power
Over temp
Input power
Output power
===============================================================================
*A:7210-SAS-X>show#
card
Syntax
card [slot-number] [detail]
card state
Context
show
Description
This command displays card information.
If no command line parameters are specified, a card summary for all cards is displayed.
Parameters
slot-number — Displays information for the specified card slot.
Default
Values
Displays provisioned and equipped card and MDA information.
detail — Displays detailed card information.
Default
Page 220
: 2
: 1
: ac single
: up
: within range
: within range
: within range
: within range
: 2
: ac single
: up
: within range
: within range
: within range
: within range
Displays all cards.
state
Displays summary information only.
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide