Deleting A Card; Deleting Port Parameters - Alcatel-Lucent 7210 SAS M Interface Configuration Manual

Service Management Tasks

Deleting a Card

The delete operation cannot be performed on an IOM card that is auto equipped and auto
provisioned during bootup and is fixed.
CLI Syntax: config> port port-id
CLI Syntax: config> card slot-number

Deleting Port Parameters

Use the following CLI syntax to delete a port provisioned for a specific card:
CLI Syntax: config>port port-id
Page 110
Guide
shutdown
card-type card-type
mda mda-number
no mda-type mda-type
no shutdown
shutdown
no port port-id
7210 SAS M, T, X, R6, Mxp Interface Configuration