Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 324

LAG Commands
-------------------------------------------------------------------------------
1/1/5
1/1/5
1/1/6
1/1/6
===============================================================================
*A:dut-c#
LAG Description Output — The following table describes detailed LAG statistics output fields.
LACP Status
Lag-id
Port-id
Adm
Act/Stdby
Opr
Description
Sample Output
*A:7210SAS>show# lag description
===============================================================================
Lag Port States
LACP Status: e - Enabled, d - Disabled
===============================================================================
Lag-id Port-id
-------------------------------------------------------------------------------
1(e)
15(e)
25(d)
===============================================================================
*A:7210SAS>show#
LAG Port Output — The following table describes detailed LAG statistics output fields.
Page 318
actor No
partner No
actor No
partner No
Label
The service associated with the LAG.
The LAG or multi-link trunk (MLT) that the port is assigned to.
The port ID configured or displayed in the slot/mda/port format.
The administrative state of the port/KAG. Displays UP to indicate
LAG/port is administratively UP (no shutdown) state and displays
Down to indicate LAG/port is administratively Down (shutdown)
state.
Indicate if the member port of the LAG is active link or standby link.
Operational state of the LAG/port.
User configured description for the LAG.
Adm Act/Stdby Opr
up
6/1/1 up active
up
3/1/2 up active
4/1/1 up active
up
3/1/1 down active
5/1/4 up active
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide
No Yes Yes Yes
No Yes Yes Yes
No Yes Yes Yes
No Yes Yes Yes
Description
Description
up N/A
up 10-Gig Ethernet
up N/A
up 10/100/Gig Ethernet SFP
up 10/100/Gig Ethernet SFP
up N/A
down 10/100/Gig Ethernet SFP
up 10/100/Gig Ethernet SFP
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes