Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 17

The 7210 SAS-M are platforms which has a set of fixed ports and supports one expansion slot.
Software pre-provisions the cards on bootup. The expansion slot is represented as a MDA and
supported MDAs can be plugged into the expansion slot. The list of MDAs supported on 7210
SAS-M is available in the 7210 SAS release notes.
The following display output of show card command lists the cards auto-provisioned on 7210
SAS-M chassis:
Sample output for 7210 SAS-M:
A:7210#
===============================================================================
Card State
===============================================================================
Slot/
Id
-------------------------------------------------------------------------------
1
1/1
1/2
A
The 7210 SAS-T, 7210 SAS-X, and 7210 SAS-Mxp are platforms which has a set of fixed port.
Software pre-provisions the cards on bootup. No expansion slots are supported on these platforms.
The following display output of show card command lists the cards auto-provisioned on 7210
SAS-X, 7210 SAS-T, and 7210 SAS-Mxp chassis:
Sample output for 7210 SAS-X:
A:7210-SAS-X>show# card
===============================================================================
Card Summary
===============================================================================
Slot
-------------------------------------------------------------------------------
1
A
===============================================================================
A:7210-SAS-X>show#
Sample output for 7210 SAS-T:
A:7210SAST>show# card
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide
show card state
Provisioned Equipped
Type Type
iom-sas iom-sas
m24-1gb+2-10gb m24-1gb+2-10gb
m4-ds1-ces m4-ds1-ces
sfm-sas sfm-sas
Provisioned
Card-type
iom-sas
sfm-sas
Admin Operational
State State
up up
up up
up up
up up
Equipped Admin
Card-type State
iom-sas up
sfm-sas up
Interface Configuration
Num Num Comments
Ports MDA
2
24
4
Active
Operational
State
up
up/active
Page 11