Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 292

Service access switch
Hide thumbs Also See for 7210 SAS M:
Table of Contents

Advertisement

Port Show Commands
Errors
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
-------------------------------------------------------------------------------
Unicast Packets
Multicast Packets
Broadcast Packets
Discards
Unknown Proto Discards
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors :
FCS Errors
SQE Test Errors
CSE
Too long Frames
Symbol Errors
===============================================================================
Ethernet Output — The following table describes Ethernet output fields.
Broadcast Pckts
Multicast Pckets
Undersize Pckets
Page 286
:
:
:
:
:
Label
The number of packets, delivered by this sub-layer to a higher (sub-)
layer, which were addressed to a broadcast address at this sub-layer.
The total number of packets that higher-level protocols requested be
transmitted, and which were addressed to a multicast address at this
sub-layer, including those that were discarded or not sent.
For a MAC layer protocol, this includes both Group and Functional
addresses.
The number of packets, delivered by this sub-layer to a higher (sub-)
layer, which were addressed to a multicast address at this sub-layer.
For a MAC layer protocol, this includes both Group and Functional
addresses. The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a multicast
address at this sub-layer, including those that were discarded or not
sent. For a MAC layer protocol, this includes both Group and Func-
tional addresses.
The total number of packets received that were less than 64 octets long
(excluding framing bits, but including FCS octets) and were otherwise
well formed.
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide
2651
Input
142210189554
0
Sngl Collisions
1095
Mult Collisions
0
Late Collisions
0
Excess Collisns
0
Int MAC Tx Errs
1509
Int MAC Rx Errs
Description
Output
0
0
0
0
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas t7210 sas x7210 sas r67210 sas mxp os

Table of Contents