Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 223

Power supply
number
AC power
DC power
Over temp
Status
Sample Output
*A:MTU-A# show chassis
===============================================================================
Chassis Information
===============================================================================
Name
Type
Location
Coordinates
CLLI code
Number of slots
Number of ports
Critical LED state
Major LED state
Minor LED state
Over Temperature state
Base MAC address
Hardware Data
Part number
CLEI code
Serial number
Manufacture date
Manufacturing string
Manufacturing deviations
Time of last boot
Current alarm state
-------------------------------------------------------------------------------
Environment Information
Number of fan trays
Number of fans
7210 SAS M, T, X, R6, Mxp Interface Configuration Guide
Label
The ID for each power supply installed in the chassis.
Within range — AC voltage is within range.
Out of range — AC voltage is out of range.
Within range — DC voltage is within range.
Out of range — DC voltage is out of range.
Within range — The current temperature is within the acceptable
range.
Out of range — The current temperature is above the acceptable
range.
Up — The specified power supply is up.
Down — The specified power supply is down
Description (Continued)
: MTU-A
: 7210 SAS-M-1
:
:
:
: 2
: 24
: Off
: Off
: Off
: OK
: 00:11:00:22:bc:11
:
:
: MTUSN107210
:
:
:
: 2001/06/27 11:14:43
: alarm cleared
: 1
: 3
Interface Configuration
Page 217