Danfoss VLT AQUA Drive FC 202 Operating Instructions Manual page 73

®
VLT AQUA Drive
Operating Instructions
[2581] Pump Status
NB!
Please consult the
0-21 Display Line 1.2 Small
Option:
[1662] * Analog input 53
0-22 Display Line 1.3 Small
Option:
[1614] * Motor Current
0-23 Display Line 2 Large
Option:
[1615] * Frequency
0-24 Display Line 3 Large
Option:
[1652] * Feedback [Unit]
0-37 Display Text 1
Range:
0 N/A* [0 - 0 N/A]
0-38 Display Text 2
Range:
0 N/A* [0 - 0 N/A]
Status for the operation of each individual pump controlled by the Cascade Controller
®
VLT AQUA Drive Programming Guide, MG.20.OX.YY
Function:
Select a variable for display in line 1, middle position.
The options are the same as those listed for par. 0-20
Function:
Select a variable for display in line 1, right position.
The options are the same as those listed for par. 0-20
Function:
Select a variable for display in line 2. The options are the same as those listed for par. 0-20
Line 1.1 Small
.
Function:
Select a variable for display in line 2. The options are the same as those listed for par. 0-20
Line 1.1 Small
.
Function:
In this parameter it is possible to write an individual text string for display in the LCP or to be read
via serial communication. If to be displayed permanently select Display Text 1 in par. 0-20 Dis-
play Line 1.1 Small , par. 0-21 Display
Line 2 Large
0-23 Display
change a character. Use the
by the cursor, it can be changed. Use the
character can be inserted by placing the cursor between two characters and pressing
Function:
In this parameter it is possible to write an individual text string for display in the LCP or to be read
via serial communication. If to be displayed permanently select Display Text 2 in par. 0-20 Dis-
Line 1.1 Small
play , par. 0-21 Display
0-23 Display Line 2 Large
change a character. Use the
by the cursor, this character can be changed. A character can be inserted by placing the cursor
between two characters and pressing
®
MG.20.M5.02 - VLT is a registered Danfoss trademark
8. How to programme the frequency converter
for detailed information.
Display Line 1.1 Small
Display Line 1.1 Small
Line 1.2 Small , par. 0-22 Display
Line 3 Large
or par. 0-24 Display . Use the
◀ ▶
and buttons to move the cursor. When a character is highlighted
▲ ▼
or buttons on the LCP to change a character. A
Line 1.2 Small
, par. 0-22 Display
or par. 0-24 Display Line 3 Large . Use the
◀ ▶
and buttons to move the cursor. When a character is highlighted
▲ ▼
or .
.
.
Display
Display
Line 1.3 Small , par.
▲ ▼
or buttons on the LCP to
▲ ▼
or .
Line 1.3 Small
, par.
▲ ▼
or buttons on the LCP to
73
8