Danfoss VLT AQUA Drive FC 202 Operating Instructions Manual page 24

5. Electrical installation
5.1.6. Mains connection for A2 and A3
5
Illustration 5.6: First mount the two screws on the mounting plate, slide it into place and tighten fully.
Illustration 5.7: When mounting cables, first mount and tighten earth cable.
The earth connection cable cross section must be at least 10 mm
IEC 61800-5-1
24
.
MG.20.M5.02 - VLT
2 or 2 rated mains wires terminated separately according to
®
is a registered Danfoss trademark
®
VLT AQUA Drive
Operating Instructions
EN 50178/