Inspect The Electrical Wiring - Models With Electric Winch; Perform Electric Winchmaintenance - Genie Lift Service Manual

September 2016
B-2 B-2 Ins pect the Electrical Wiring - Models With El ectric Wi nch
Inspect the Electrical Wiring -
Models with Electric Winch
Genie requires that this procedure be performed
every 250 hours or quarterly, whichever comes
first.
Maintaining electrical wiring in good condition is
essential to safe operation and good machine
performance. Failure to find and replace burnt,
chafed, corroded or pinched wires could result in
unsafe operating conditions and may cause
component damage.
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
1 Inspect the following areas for burnt, chafed,
pinched, corroded and loose wires:
• Control panel
• Battery pack
• Remote control
• Channel frame
Part No. 115417
Checklist B Procedures
B-3 B-3 Per form Elec tric Winc hM aintenanc e
Perform Electric Winch
Maintenance
Genie specifications require that this procedure be
performed every 250 hours or quarterly, whichever
comes first.
Required maintenance procedures and additional
winch information is available in the Owner Manual
for Rule Winches (Rule part number W-1013).
Owner Manual for Rule Winches
Genie part number
Genie Lift
Service Manual
85220
25