Genie Lift Service Manual page 35

September 2016
12 From the winch side of the machine, wrap the
cable 1 time counterclockwise around the
winch drum. Thread the cable through the
oblong hole and attach it to the winch drum
with the cable retaining fastener.
13 While holding the cable tie on the drum, rotate
the winch until all the cable is spooled onto the
drum neatly and evenly. Be sure there are at
least 4 wraps of cable on the winch drum.
Component damage
hazard. Improperly wound cable
may result in poor winch
performance and accelerate
cable wear. Be sure the cable
winds onto the winch drum
evenly.
Part No. 115417 Genie Lift
Service Manual
Base Assembly
35