Table of Contents
Advertisement
2.11
SATA HDD Drive
The UNO-3283G series product supports two 2.5" SATA HDD with up to 6Gbps
speed.
The UNO-3283G support RAID0 and RAID1. The RAID function should be enabled
in BIOS setup before you install an operating system into a RAID volume. User can
enable RAID function in BIOS sub-menu "Advance\SATA Configuration".
Please follow the below steps to create a RAID volume.
1.
Mount two SATA HDDs in the system.
2.
Power on the system.
3.
Press "F2" to enter into BIOS setup during POST.
4.
Enable RAID mode in BIOS setup menu "Advance\SATA Configuration".
5.
Press "F4" to save and exist the BIOS setup.
6.
Press "Ctrl+I" to enter RAID configuration utility when the Intel Rapid Storage
Technology option ROM screen appears.
UNO-3200G Series User Manual
Figure 2.8 SATA Mode Selection
Figure 2.9 Detecting a RAID configuration
14
Advertisement
Table of Contents
