2.9
PCI Express Mini Card Socket
There are two sockets for full size PCI Express mini cards. The first interface (CN20)
is the default defined for mSATA. The second (CN19) interface is mainly target to
support iDoor technology/ module for diversified application such as isolated COM
port, Profibus, WLAN GPRS, 3G, mRAM and so on. Users can install the card easily
by using the optional kit.
2.9.1
iDoor Expansion Slot
At the front side, there's a iDoor Expansion slot that provide user to install Mini-PCIe
modules to extend extra I/O port for specific application, like Isolation COM, Digital I/
O, CAN modules.
2.10
PCIe/PCI Slot
In order to fulfill user's extensive requirements, UNO-3283G provide one PCIe x16
slot and one PCI slot. The PCIe slot could provide user to install standard PCIe card
compatible with PCIe x16, PCIe x8, PCIe x4, for example, USB expansion card,
Ethernet expansion card...etc.
Note!
PCI/PCIe Card need supports wide temperature range(at least +70° C).
Figure 2.7 PCIE mini card sockets placement
13
UNO-3200G Series User Manual