Technogym WAVE EXCITE+ Service Maintenance Manual page 136

Figure 7.12-6
Figure 7.12-7
Pagina 7.36
Cardio WAVE EXCITE +: Service & maintenance manual - rev. 4.1
To reassembly the lever, carry out the above
CAUTION: To easily reassembly the
lever, avoiding to damage the internal
bearings
(0T020901AA).
7. Screw completely in the special tool (e) on
the pin frame (f).
8. Insert the lever (d) on the pin (e), moving
slowly and paying particular attention to the
internal bearings of the lever.
CAUTION: During the reassembly,
check the length of the tie rods, as
detailed at the paragraph: 8.6. "Tie rod
length", if they had been removed.
steps in reverse order.
use the special pin