Technogym WAVE EXCITE+ Service Maintenance Manual page 128

Figure 7.7-4
Figure 7.7-5
Figure 7.7-6
Pagina 7.28
Cardio WAVE EXCITE +: Service & maintenance manual - rev. 4.1
7. Back off the screw (e) on both side of the
machine, using a 5mm hexagonal wrench.
8. Pull out the central guard from the top.
9. Remove the sweat protection guard (e1) if
necessary.
10. Overturn the machine on one side and back
off the 4 nuts (f) using a 17mm wrench.
11. Place the machine in usage position and pull
out the rear guard assembly from the top.
CAUTION: During reassembly, lock
down the screws (f) using a torque
wrench setting of 27Nm.
To reassemble the guards, carry out the above
steps in reverse order.