Table of Contents
Advertisement
SETUP INSTRUCTIONS
Electric Lock Release Settings
You can open the lock by touching
There are two icons
and opened
independently. If system connected to a lock, remember to set unlocking time and lock
mode. Settings are
on the left hand side, at the bottom
Touch and hold 'Unlock ' button for 2 seconds to open digital keypad page. Using the keypad, type
in the following codes:
8010 # for Power-on-to open lock
8011 # for Power-off-to open lock
To set the unlocking time, use codes 8401-8499 # for 1 to 99 seconds
Example: Type in 8401 # for 1 second unlocking time, 8499 # for 99 secs unlocking time
• On the Main menu page touch [Logo] icon to enter About page
• Press and hold for 2 sec UNLOCK
• Digital keypad will be shown
UNLOCK
Lock1 and Lock2 which means you can have up to 2 electric locks connected
changed on the ' Installer Setup' page. To access the page, touch 'Logo' icon
00:10
DS-1
Local Address
Video Standard
System Verson
Display Driver
Font
UI
Button or touching
button
About
00.00
AUTO
00.01.00
1.0
1.0
1.0
icon on the screen.
INSTALLER SETUP
_
? + OK: Help Menu
@ + OK: Address Setting Menu
123
-17-
Advertisement
Table of Contents
