3. Connection of Peripheral Devices 3.1 Additional Doorbell Additional Door Bell can be connected according the diagram below. There will be no video on the monitor when this door bell used EXT-RING Door bell call button VIDEO 3.2 Additional Ringer Additional Ringer can be connected according the External Ringer diagram below.
5. Answering a Door Call When the door station is rung, the Monitor comes on with video To start a conversation, press the TALK Button on monitor. When you are finished, press the TALK button again. The screen turns off automatically after 40 seconds During talking state, Press UNLOCK Button...
7. Setup Instructions When Monitor is in standby mode, press Menu button and to navigate between pages Intercom Call > Inner Call > Call Guard Unit > 7.1 Language Select Language on setup page, then press MENU button to enter the language page, and then use Button to move up / down to select the language you want.
Page 6
8. Monitor Parameters Settings How to enter parameter settings: About Installer Setup Language > H/W : a1.2 User Setup > S/W : V01.01.01 [ 0000 ] About > Address : 00.00 Video STD : AUTO Exit Exit 1.Select About and 2.Press UNLOCK button 3.Use Button to increase...
Power Saving Mode On/Off By default the system is set to power saving mode, where only the first monitor with User Code 0 comes On with video when door staition called. All the other monitors will ring but without video. Video is transferred to the monitor which answers the call.
Page 8
User Code/Address Setup via DIP Switches In Apartment Systems, every apartment must have a unique User Code In House systems, programming via DIP switches should be used when the intercom call function is chosen as default •DIP switches 1-6 settings for up to 32 User codes in the Tables below •DIP 6 determines the end of line.
Page 9
9. Image and Volume Adjustments Such adjustments can be made in Manual monitoring state. Press MONITOR button and then MENU button. Navigate to the Sceen, Brightness and Talk Volume and set desired values. Press MONITOR button to save new settings. Press MENU button to exit DS-1 00:15 Brightness 5 10.
11. Intercom Function When multiple monitors are installed, Intercom function between all monitors in the system becomes available. Intercom Call > There are 3 Intercom functions to choose from: Inner Call > Call Guard Unit > Intercom Call : Allows to call one specific monitor at the time in House system or to call other apartments in Apartments system.
Page 11
Playback - Reserved Light - to turn the staircase light. The staircase light will be turned off automatically Light Option Playback > Turn on Light > Turn on 5 Min Call Transfer > Turn off Exit Note: the staircase light function will be activated only when the system has light connected via RLC Lock Interface 12.
13. Specification ● Power supply: DC 20~28V ● ● Power consumption:● Standby 7.51mA; Working status 155mA ● Monitor screen:● ● 3.5 Inch colour LCD ● Display Resolution: ● 320(R,G,B) x 240 pixels ● Video signal:● ● 1Vp-p, 75 , CCIR standard ●...
4. Attempting to force the device to perform functions for which it is not intended 5. Attaching the device to power supplies other than thoserecommended by the manufacturer Distributor for Warranty purposes: Intelligent Home Online Ltd 62 Hartley Old Road Purley Surrey CR8 4HJ +44 (0)20 86170015 www.intelligenthomeonline.com...
Page 14
LEDA 2-wire series Designs and specifications may be changed without notice Rights to interpret and copyright of this manual are reserved. www.intelligenthomeonline.com -18-...
Need help?
Do you have a question about the LEDA and is the answer not in the manual?
Questions and answers