Contents 1. Parts and Functions................1 2. Monitor Mounting ...................2 3. Main Menu .....................2 4. System Wiring ..................3 5. Door Release Operation ................7 6. Intercom Function ..................8 7. Memory Sharing ...................9 8. Album Playback(for SD card model only) ..........10 9. Basic Setup Instructions ................12 10.
1. Parts and Functions Digital TFT LCD Screen Indicator 1 Microphone Indicator 2 UNLOCK Button TALK/MON Button MENU Button Mounting Hook Speaker Connection Port Mounting Hook SD card slot Key functions LCD screen Display the visitors' image Indicator 1 Shows the power status of monitor Indicator 2 Lights up when there are new pictures to be viewed Unlock button...
2. Monitor Mounting Mounting kit: 1) Mounting Bracket. 2) Two 4x25mm screws. Installation: ■ Average installation height for indoor monitor 145- 160cm (refer to sketch map). ■ Attach the screws to the wall to fix the mounting bracket. ■ Hang the monitor firmly on the bracket. ■...
4. System Wiring Terminal Description Handset 75 Ohm Power JS-AP JP/VD DC-IN DC- DC+ JS-OS1 JS-OS2 JS-VD Input 1 Input 2 Output 1) DC-IN: Power supply connection port 2) JP/VD: JP/VD is used for setting the video impedance. 3) JS-AP: Audio phone or RLC module connection port 4) JS-OS1: The first doorbell connection port 5) JS-OS2: The second doorbell connection port 6) JS/VD: Extended slave monitor connection port...
5. Basic Door Release Operation Answering a Door Call 1. Press the CALL button on door station. 2. The monitor rings,and the visitor's image will be seen on screen. Note: the screen turns off after 30 seconds(default) if nobody answers. 3.
DS-1 00:23 Door 1 Door 2 Door 3 Door 4 Note: If the system utilizes the QSW module, video quad split monitor is available, see the diagram on right. For more information, Door 1 Door 2 Door 3 Door 4 please refer to the QSW user manual.
-10- Touch Memory Playback icon on main menu page (SD version of monitor only). ► 4 pictures will be displayed in each memo. ► The newest pictures will be displayed first. Last ► When the built-in memory is full (max. 800 pictures), the oldest picture will be de- 2011-09-13 004 2011-09-13 003...
-11- Date and Time Setting There are two formats for date and time dis- 2011-09-13 16:30 play, refer to part 9->date/time format. Touch User Setup ->>Calendar. Use "cancel" key to select the setting item. After finishing, touch "save" key to save settings. Day Time Setting The day time setting is used to distinguish the day ring volume and night ring volume.
-12- 9. Basic Setup Instructions Ring Tone Settings Touch User Setup item to enter setup page. Select Master Call Tone, Slaver Call Tone or Intercom Call Tone item, There are 12 ring tones can be selected. Touch a ring tone you want, then touch icon to save settings or touch icon to exit.
-13- 10. Installer Setup Instructions Touch User Setup ->>Installer Setup, enter password (2412 > “save”) to enter the menu.There is a total of 16 options which can be modified. Input the corresponding value by touching the digital keypad to modify the setting. Then either save or cancel. Default Item Description...
Page 16
-14- Default Item Description value Used to add the remote control or delete remote Remote Control control,[0]:delete remote control;[1]:add remote control. Staircase light.[0]: don’t turn light on when re- ceive calls;[1]:light on at night only when receive calls;[2]light on at any time when receive calls. Staircase Light Note that this parameter should be set on master monitor (user code=1), for slave monitors this set-...
-15- 11. Monitor Advanced Setting Touch "About" button on main menu page,the monitor current parameters will be shown on screen,press Unlock button and hold for 3s,a digital keypad will be shown,input the code number by touching the keypad, touch “cancel” button to cancel, touch “save”...
4. Attempting to force the device to perform functions for which it is not intended 5. Attaching the device to power supplies other than thoserecommended by the manufacturer Distributor for Warranty purposes: Intelligent Home Online Ltd 62 Hartley Old Road Purley, Surrey CR8 4HJ +44 (0)20 86170015 www.intelligenthomeonline.com...
Page 20
The design and specifications can be modified without notice to the user. Right to interpret and copyright of this manual are preserved. Printed In China / 2013. 11...
Need help?
Do you have a question about the Cronus 4-wire and is the answer not in the manual?
Questions and answers